What should be included in the first RFQ email?

Include frame size candidate, torque at target speed, current/voltage window, interface drawing revision, quantity plan, and destination.

How quickly can we get an actionable response?

Most complete RFQs receive first-round engineering feedback and quote direction within one business day.

Can we discuss custom OEM requirements before PO?

Yes. We encourage pre-PO engineering clarification to reduce prototype and mass-production risk.

Contact | Robotic Joint Module

Contact

Share your application, target specs, and quantity plan. We will respond with practical engineering and sourcing support.

Typical Modules Reviewed in First RFQ

Visual references that help buyers align architecture scope before sending final drawings and quantity plans.

Joint module sample commonly referenced in first RFQ discussions

Integrated actuator assembly for technical-commercial review

Control-side module visual for bus and commissioning discussions

Inquiry Email

[email protected]

Open email app

Send target torque/speed, protocol, quantity, and delivery location.

Instant Chat

+86 18857971991

Start WhatsApp

Direct response from our engineering team.

RFQ Checklist Before You Send

Required Item	Example	Why It Helps
Target motor family	robot joint module family and target actuator topology	Quickly narrows viable models and quote range.
Torque at speed	1.2 N·m at 600 RPM	Prevents over-reliance on holding torque only.
Mechanical interface	Shaft, flange, connector drawing revision	Avoids sample mismatch and assembly rework.
Quantity plan	Prototype qty + annual forecast	Improves lead-time and pricing accuracy.
Destination and terms	Country, Incoterm, requested ship date	Aligns packaging, documents, and shipping plan early.

What Happens After Inquiry

Engineering pre-check for model fit and data completeness.
Quote direction with lead-time assumptions and risk notes.
Sample scope alignment and validation acceptance criteria.
Production and delivery planning for approved programs.

Common Clarification Questions

Can I send a rough requirement before final drawings are ready?

Yes. Send your current assumptions first, then mark pending items clearly so we can return a provisional quote scope.

How should we handle engineering changes after sample approval?

Use a revision-controlled change request with effective lot and impact scope agreed by both teams.

Can we align on compliance files before mass production?

Yes. Please list required document types in the RFQ stage so they are included in validation and delivery planning.

Suggested First RFQ Email Format

If your team needs a fast start, use this structure in the first email. It improves quote precision and reduces clarification cycles.

Project background and application scenario.
Motor target: frame size candidate, torque at speed, electrical window.
Mechanical interface: shaft, flange, connector, drawing revision.
Commercial scope: prototype quantity, annual forecast, destination, and target ship date.

What You Should Review Before Sending RFQ

Products for architecture-level selection and model-family fit.
Solutions / Applications for scenario-specific constraints and validation priorities.
OEM Capabilities for design collaboration, quality controls, and delivery process.
Engineering Blog for practical checklists you can copy into buyer workflows.
Product Buyer Guides when your inquiry needs architecture comparison and selection criteria.
Supplier Qualification Guides when your request is blocked by compliance evidence, quality packet, or lead-time qualification gaps.

Typical First Response Package

Output	Purpose	Buyer Action
Model and architecture direction	Narrow viable options against torque-speed and interface assumptions.	Confirm baseline model path before cost-detail discussion.
RFQ clarification list	Close data gaps that affect pricing and lead-time accuracy.	Return missing values and drawing references in one reply.
Validation recommendation	Define sample test scope and acceptance evidence for technical sign-off.	Align internal engineering and procurement gates before PO.

RFQ Checklist Before You Send

Required Item	Example	Why It Helps
Target motor family	robot joint module family and target actuator topology	Quickly narrows viable models and quote range.
Torque at speed	1.2 N·m at 600 RPM	Prevents over-reliance on holding torque only.
Mechanical interface	Shaft, flange, connector drawing revision	Avoids sample mismatch and assembly rework.
Quantity plan	Prototype qty + annual forecast	Improves lead-time and pricing accuracy.
Destination and terms	Country, Incoterm, requested ship date	Aligns packaging, documents, and shipping plan early.

Common Clarification Questions

Can I send a rough requirement before final drawings are ready?

Yes. Send your current assumptions first, then mark pending items clearly so we can return a provisional quote scope.

How should we handle engineering changes after sample approval?

Use a revision-controlled change request with effective lot and impact scope agreed by both teams.

Can we align on compliance files before mass production?

Yes. Please list required document types in the RFQ stage so they are included in validation and delivery planning.

Suggested First RFQ Email Format

If your team needs a fast start, use this structure in the first email. It improves quote precision and reduces clarification cycles.

Project background and application scenario.

Motor target: frame size candidate, torque at speed, electrical window.

Mechanical interface: shaft, flange, connector, drawing revision.

Commercial scope: prototype quantity, annual forecast, destination, and target ship date.

What You Should Review Before Sending RFQ

Products for architecture-level selection and model-family fit.

Solutions / Applications for scenario-specific constraints and validation priorities.

OEM Capabilities for design collaboration, quality controls, and delivery process.

Engineering Blog for practical checklists you can copy into buyer workflows.

Product Buyer Guides when your inquiry needs architecture comparison and selection criteria.

Supplier Qualification Guides when your request is blocked by compliance evidence, quality packet, or lead-time qualification gaps.

Typical First Response Package

Output	Purpose	Buyer Action
Model and architecture direction	Narrow viable options against torque-speed and interface assumptions.	Confirm baseline model path before cost-detail discussion.
RFQ clarification list	Close data gaps that affect pricing and lead-time accuracy.	Return missing values and drawing references in one reply.
Validation recommendation	Define sample test scope and acceptance evidence for technical sign-off.	Align internal engineering and procurement gates before PO.